Moss-gone & Quatracide

Treating Exterior Surfaces Against Moss, Mould & Lichen. Initial treatment: 1:5 (20%) with fresh water. Subsequent Treatments:1:20 (5%) with fresh water.

Lichen: use undiluted. Spray solution onto affected areas and leave. For faster results increase the solution strength. Aim for a dry-contact time of a least 3

hours. Fish Processing: May be used at 1:200 dilution as a”no-rinse” sanitiser, but only when fish is processed. Food contact surfaces must be thoroughly

drained to minimise residues. Food Plant Sanitation: Clean the surface, make a 1% solution of the product with water. Waterblast, spray or brush on to surface.

Leave for 15 minutes, then rinse off with potable water. In the case of operators that only process fish, rinsing after application of this product is not necessary,

however food contact surfaces must still be thoroughly drained to minimise residues. For all other operators, food surfaces must be thoroughly rinsed with

potable water before production starts.

Under Good Practice Protocol based on accepted international research a 1% solution of this product, diluted with potable water, is recommended with liberal application on clean hard surfaces with a minimum contact time of 10 minutes. At this concentration the product provides 1000PPM QAC.