Sani-Spray

MPI Approved and Direct Inspected MPI Multi-Site Facilities Ready-to-use. Use undiluted. Ensure all electrical equipment is switched off and unplugged from power supply before use. Spray directly onto surfaces and accessible areas. May be wiped with a clean cloth or paper towel. Leave for 15 minutes before electrical re-start. Use minimally, and ensure excess is wiped off after application. Before use, all edible product and packaging material must be removed from the room or carefully protected. After the sanitising process is complete, the surfaces should be rinsed, unless used as part of fish processing operations for which however the food contact surfaces must be thoroughly drained/dried to minimise residue. Non-MPI Approved / Inspected Facilities As above, but after the sanitising process is complete, the surfaces do not require additional rinsing before use.

Under Good Practice Protocol based on accepted international research an undiluted solution of this product is recommended with liberal application on clean hard surfaces with a minimum contact time of 1 minute. (70% W/V Ethanol)